Description
MARKO PLEXI-GLASS CLEANER
will not harm plastic
surfaces the way ammoniated
glass cleaners will. Besides
cleaning plexi-glass safely,
this product may be used on
many types of surfaces as an
all-purpose cleaner. Dilute
the product at 1 part cleaner
: 3 parts water for various
jobs as needed. Spray a small
amount in a fine mist over
the surface to be cleaned.
Wipe off with a soft,
absorbent cloth or paper
towel. Old bed linens or face
towels that have been
laundered many times make
ideal cloths for this
purpose. Spray surface with a
fine mist and use absorbent
towels to remove grime. Marko
also carries suitable towels
and wipers if needed (see
below).
Outside Windows: Since
weather plays a major part in
outdoor cleaning, please make
sure GLASS CLEANER is
properly diluted at 1 part
cleaner : 3 parts water to
slow its evaporation rate.
Otherwise, the product can
dry too quickly and leave
streaks. Spray surface with a
fine mist and use absorbent
towels to remove grime.
Inside Glass: Determine
whether the surface to be
cleaned is hot, warm or cold.
Hot glass will cause
PLEX-GLASS CLEANER to
evaporate too quickly unless
diluted as described under
Outside Windows above. On
cold glass, use this product
un-diluted for fastest drying
time to reduce any chance of
streaking. If streaking
occurs, check dilution and
make sure cleaning rags or
wipers are clean and proper
for the job. PLEX-GLASS
CLEANER will not leave
streaks if directions are
followed!