Description
General Cleaning MARKO GLASS
CLEANER may be used on many
types of
surfaces besides glass as an
all-purpose cleaner. Dilute
the product
at 1 part cleaner : 3 parts
water for various jobs as
needed. Spray
a small amount in a fine mist
over the surface to be
cleaned. Wipe
off with a soft, absorbent
cloth or paper towel. Old bed
linens or
face towels that have been
laundered many times make
ideal cloths
for this purpose. Marko also
carries suitable towels and
wipers if
needed.) Outside Windows
Since weather plays a major
part in outdoor
cleaning, please make sure
GLASS CLEANER is properly
diluted at 1
part cleaner : 3 parts water
to slow its evaporation rate.
Otherwise, the product can
dry too quickly and leave
streaks. Spray
surface with a fine mist and
use absorbent towels to
remove grime.
Inside Glass Determine
whether the surface to be
cleaned is hot,
warm or cold. Hot glass will
cause GLASS CLEANER to
evaporate too
quickly unless diluted as
described under Outside
Windows above. On
cold glass, use this product
un-diluted for fastest drying
time to
reduce any chance of
streaking. If streaking
occurs, check dilution
and make sure cleaning rags
or wipers are clean and
proper for the
job. GLASS CLEANER will not
leave streaks if directions
are
followed! DO NOT USE ON
PLEXI-GLASS.